Lenovo ThinkCentre Edge 92z Скачать руководство пользователя | Manualshive

Страница: 44 / 126

background image

• Some models have a front audio panel you can use to adjust volume. If you have a front audio panel,

verify that the volume is not set too low.

• Verify that your external speakers (and headphones, if used) are connected to the correct audio connector

on the computer. Most speaker cables are color-coded to match the connector.

Note:

When external-speaker or headphone cables are attached to the audio connector, the internal

speaker, if present, is disabled. In most cases, if an audio adapter is installed in one of the expansion slots,
the audio function built into the system board is disabled; use the audio jacks on the adapter.

• Make sure that the program you are running is designed for use in the Microsoft Windows operating

system. If the program is designed to run in DOS, the program does not use the Windows sound feature
and must be configured to use SoundBlaster Pro or SoundBlaster emulation.

• Verify that the audio device drivers are correctly installed. See Microsoft Windows help system for more

information.

If these actions do not correct the problem, run the diagnostic programs (see “Diagnostics” on page 51 for
instructions). If you need technical assistance, see “Additional information resources” on page 31.

An audio disc or AutoPlay-enabled disc does not automatically play when it is
inserted into a drive

Symptom: An audio disc or AutoPlay-enabled disc does not automatically play when it is inserted into a drive

Action: See “CD problems” on page 38.

Sound comes from one external speaker only

Symptom: Sound comes from one external speaker only.

Actions:

• Ensure that the speaker cable is inserted completely into the connector on the computer.

• Make sure the cable that attaches the left speaker to the right speaker is securely connected.

• Double-click the speaker icon in the Windows notification area. A master volume-control window opens.

Verify that the Balance settings are set correctly.

If these actions do not correct the problem, you might have a failing speaker. Have the speaker serviced. If
you need technical assistance, see “Additional information resources” on page 31.

No audio in DOS applications or games

Symptom: No audio in DOS applications or games

Actions:

• Make sure the DOS application or game is configured to use SoundBlaster Pro or SoundBlaster

emulation. Refer to the documentation that comes with the application or game for instructions on
setting sound-card settings.

• If these actions do not correct the problem, run the diagnostic programs (see “Diagnostics” on page 51

for instructions). If you need technical assistance, see “Additional information resources” on page 31.

CD problems

Select your symptom from the following list:

•

“An audio disc or AutoPlay-enabled disc does not automatically play when it is inserted into a CD

drive” on page 39

38

ThinkCentre Edge Hardware Maintenance Manual

«
...
42
43
44
45
46
...
»

Содержание ThinkCentre Edge 92z































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkCentre Edge 92z

and Vantage Pro

Бренд: DAVIS Страницы: 16

IBM LOTUS NOTES-DOMINO V 11.3 - INSTALLATION AND ...

Бренд: Tandberg Data Страницы: 49

Бренд: Primera Страницы: 19

AUTODESK ROBOT STRUCTURAL ANALYSIS PROFESSIONAL

Бренд: Autodesk Страницы: 6

Бренд: Juniper Страницы: 748

SNAP DEPLOY 2.0 -

Бренд: ACRONIS Страницы: 68

PRIVILEGED USER MANAGER 2.2

Бренд: Novell Страницы: 37

PID Control Toolkit 371685C-01

Бренд: National Instruments Страницы: 39

App for Android

Бренд: TomTom Страницы: 58

WayPoint Map Loader

Бренд: Mobile Crossing Страницы: 32

Бренд: Creative Страницы: 84

Бренд: 2Wire Страницы: 35

Portal Server ETV v4.2

Бренд: VBrick Systems Страницы: 64

Бренд: R&S Страницы: 45

Бренд: THOMSON Страницы: 22

Database Advanced Security 10g Release 1

Бренд: Oracle Страницы: 518

BREEZE-USING THE BREEZE PUBLISH WIZARD

Бренд: MACROMEDIA Страницы: 32

Бренд: Janome Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды