Lenovo ThinkCentre Edge 92z Скачать руководство пользователя

Страница: 46 / 126

Black screen instead of DVD video

Symptom: Black screen instead of DVD video

Actions:

• Restart the DVD player program.

• Close any open files, turn off the computer, and then restart the computer.

• Try a lower screen resolution or color depth.

If these actions do not correct the problem, run the diagnostic programs (see “Diagnostics” on page 51 for
instructions). If you need technical assistance, see “Additional information resources” on page 31.

DVD movie will not play

Symptom: DVD movie will not play.

Actions:

• Make sure that the disc surface is clean and not scratched.

• Check the disc or package for regional coding. You might need to purchase a disc with coding for

the region where you are using your computer.

No audio or intermittent audio while playing DVD movie

Symptom: No audio or intermittent audio while playing DVD movie.

Actions:

• Check the volume control settings on your computer and on your speakers.

• Make sure that the disc surface is clean and not scratched.

• Check all cable connections to and from the speakers.

• Use the DVD menu for the video to select a different audio track.

Playback is very slow or choppy

Symptom: Playback is very slow or choppy.

Actions:

• Disable any background programs, such as AntiVirus or Desktop Themes.

• Ensure that video resolution is set to less than 1152 x 864.

Invalid disc or no disc found message

Symptom: Invalid disc or no disc found message

Actions:

ThinkCentre Edge Hardware Maintenance Manual

Содержание ThinkCentre Edge 92z































































































































Результаты поиска

Содержание ThinkCentre Edge 92z

Отзывы:

Похожие инструкции для ThinkCentre Edge 92z

Бренды по названию

Популярные бренды

Lenovo ThinkCentre Edge 92z, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre Edge 92z

Отзывы:

Похожие инструкции для ThinkCentre Edge 92z

Бренды по названию

Популярные бренды