Lenovo ThinkCentre Edge 92z Скачать руководство пользователя

Страница: 118 / 126

Note:

You can download a self-starting bootable disc image (known as an ISO image) with the system

program updates to create a system-program-update disc. Go to:
http://www.lenovo.com/support

To update (flash) the BIOS from a disc, do the following:

1. Turn off your computer.

2. Repeatedly press and release the F12 key when turning on the computer. When the Startup Device

Menu window opens, release the F12 key.

3. On the Startup Device Menu window, select the desired optical drive as the startup device. Then, insert

the disc into this optical drive and press Enter. The update begins.

4. When prompted to change the serial number, it is suggested that you do not make this change by

pressing N. However, if you do want to change the serial number, press Y, then type in the serial number
and press Enter.

5. When prompted to change the machine type and model, it is suggested that you do not make this

change by pressing N. However, if you do want to change the machine type and model, press Y, then
type in the machine type and model and press Enter.

6. Follow the instructions on the screen to complete the update. After the update is completed, remove the

disc from the optical drive.

Updating (flashing) the BIOS from your operating system

Note:

Because Lenovo makes constant improvements to its Web sites, the Web page contents are subject

to change without notice, including the contents referenced in the following procedure.

To update (flash) the BIOS from your operating system, do the following:

1. Go to

http://www.lenovo.com/support.

2. Do the following to locate the downloadable files for your machine type:

a. In the

Enter a product number

field, type your machine type and click

b. Click

Downloads and drivers

c. Select

BIOS

from the

Refine results

drop-down list box to easily locate all the BIOS related links.

d. Click the BIOS update link.

3. Click the TXT file that contains the instructions for updating (flashing) the BIOS from your operating

system.

4. Print these instructions. This is very important because these instructions will not be displayed on

the screen after the download begins.

5. Follow the printed instructions to download, extract, and install the update.

Recovering from a POST/BIOS update failure

If the power to your computer is interrupted while the POST/BIOS is being updated (flash update), your
computer might not restart correctly. If this happens, perform the following procedure commonly called
Boot-block Recovery.

1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect

all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 76.

3. Locate the Clear CMOS /Recovery jumper on the system board. See “Locating parts on the system

board” on page 68.

112

ThinkCentre Edge Hardware Maintenance Manual

Содержание ThinkCentre Edge 92z































































































































Результаты поиска

Содержание ThinkCentre Edge 92z

Отзывы:

Похожие инструкции для ThinkCentre Edge 92z

Бренды по названию

Популярные бренды

Lenovo ThinkCentre Edge 92z, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre Edge 92z

Отзывы:

Похожие инструкции для ThinkCentre Edge 92z

Бренды по названию

Популярные бренды