Lenovo NeXtScale n1200 Скачать руководство пользователя страница 276

Страница: 276 / 878

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has asserted.

May also be shown as 800107013706ffff or 0x800107013706ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure that the water loop is operating, the relevant water tubes are in place and correctly

installed, and that the server cover is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace system board.

•

80010701-3707ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has asserted. (HDD Outlet Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has asserted.

May also be shown as 800107013707ffff or 0x800107013707ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure that the water loop is operating, the relevant water tubes are in place and correctly

installed, and that the server cover is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

262

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NeXtScale n1200

Отзывы:

Похожие инструкции для NeXtScale n1200

Бренды по названию

Популярные бренды

Lenovo NeXtScale n1200, Инструкция по установке и обслуживанию

Результаты поиска

Содержание NeXtScale n1200

Отзывы:

Похожие инструкции для NeXtScale n1200

Бренды по названию

Популярные бренды