Lenovo NeXtScale n1200 Скачать руководство пользователя страница 842

Страница: 842 / 878

2. Check the drive cabling for loose or broken connections at both ends or damage to the cable.

Replace the cable if damage is present.

3. Run the test again.

4. Check system firmware level and upgrade if necessary.The installed firmware level can be found

in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.

5. Run the test again.

6. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service

Guide" for the next corrective action.

DSA system management test results

The following messages can result when you run the system management test.

Test results for the DSA system management test

The following messages can result when you run the DSA system management test.

•

166-000-001 : IMM I2C Test Passed

IMM I2C Test Passed.

Recoverable

Severity

Event

Serviceable

Automatically notify support

•

166-801-001 : IMM I2C Test Aborted

IMM returned incorrect response length.

Recoverable

Severity

Warning

Serviceable

Yes

Automatically notify support

User Response

Perform the actions mentioned one at a time and try the test after each action:

1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.

828

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NeXtScale n1200

Отзывы:

Lenovo NeXtScale n1200, Инструкция по установке и обслуживанию, Страница: 842 / 878

Результаты поиска

Содержание NeXtScale n1200

Отзывы: