Lenovo NeXtScale n1200 Скачать руководство пользователя страница 98

Страница: 98 / 878

UEFI boot recovery jumper

Clear CMOS jumper

Figure 15. Location of the switches, jumpers, and buttons on the system board

Step 5. Move the UEFI boot backup jumper from pins 1 and 2 to pins 2 and 3 to enable the UEFI recovery

mode.

Step 6. Reinstall the server cover; then, reconnect all power cords.

Step 7. Restart the server. The system begins the power-on self-test (POST).

Step 8. Boot the server to an operating system that is supported by the firmware update package that you

downloaded.

Step 9. Perform the firmware update by following the instructions that are in the firmware update package

readme file.

Step 10. Turn off the server and disconnect all power cords and external cables, and then remove the cover

(see “Removing the cover” on page 142).

Step 11. Move the UEFI boot backup jumper from pins 2 and 3 back to the primary position (pins 1 and 2).

Step 12. Reinstall the cover (see “Replacing the cover” on page 142).

Step 13. Reconnect the power cord and any cables that you removed.

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NeXtScale n1200

Отзывы:

Lenovo NeXtScale n1200, Инструкция по установке и обслуживанию, Страница: 98 / 878

Результаты поиска

Содержание NeXtScale n1200

Отзывы: