Lenovo 7X16 Скачать руководство пользователя страница 95

Страница: 95 / 212

SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0086

User Action:

Please check event log in XClarity Controller (XCC) and CMM2 Web GUI to identify the power supply unit
failure.

1. Check system spec and replace the power supply unit with the same supported specification on

server proven plan ( https://static.lenovo.com/us/en/serverproven/flex/8721_7893.shtml )

•

FQXSPPW0003G: Failure predicted on [PowerSupplyElementName].

This message is for the use case when an implementation has detected a Power Supply failure is
predicted.

Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0088

User Action:

Please check event log in XClarity Controller (XCC) and CMM2 Web GUI to identify the power supply unit
failure.

•

FQXSPPW0005I: [PowerSupplyElementName] is operating in an Input State that is out of range.

This message is for the use case when an implementation has detected a Power Supply that has input out
of range.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0098

User Action:

Information only; no action is required

•

FQXSPPW0006I: [PowerSupplyElementName] has lost input.

This message is for the use case when an implementation has detected a Power Supply that has input
that has been lost.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0100

User Action:

Make sure power cables are connected correctly.

•

FQXSPPW0007L: [PowerSupplyElementName] has a Configuration Mismatch.

Chapter 2

XClarity Controller events

Содержание 7X16





















































































































































































































Результаты поиска

Содержание 7X16

Отзывы:

Lenovo 7X16, Справочник, Страница: 95 / 212

Результаты поиска

Содержание 7X16

Отзывы: