Lenovo 7X16 Скачать руководство пользователя страница 101

Страница: 101 / 212

This message is for the use case when an implementation has detected potential power capping when
configuration exceeds maximum power limit.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0534

User Action:

Information only; no action is required.

•

FQXSPPW0122J: CMM firmware update required for SN550 V2 support.

This message is for the use case when an implementation has detected CMM firmware update required
for SN550 V2 support.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0522

User Action:

Complete the following steps:

1. 1.Update the CMM firmware to version 2.70 or later

2. 2.If the issue persists, Contact Lenovo Support for assitance.

•

FQXSPPW2001I: [PowerSupplyElementName] has been removed from container

[PhysicalPackageElementName].

This message is for the use case when an implementation has detected a Power Supply has been
removed.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0085

User Action:

Information only; no action is required

•

FQXSPPW2002I: [PowerSupplyElementName] has returned to OK status.

This message is for the use case when an implementation has detected a Power Supply return to normal
operational status.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0087

Chapter 2

XClarity Controller events

Содержание 7X16





















































































































































































































Результаты поиска

Содержание 7X16

Отзывы:

Lenovo 7X16, Справочник, Страница: 101 / 212

Результаты поиска

Содержание 7X16

Отзывы: