Lenovo 7X16 Скачать руководство пользователя страница 136

Страница: 136 / 212

Information only; no action is required

•

FQXSPUP0007L: Invalid or Unsupported firmware or software was detected on system

[ComputerSystemElementName].

This message is for the use case when an implementation has detected an Invalid/Unsupported Firmware/
Software Version.

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0446

User Action:

Reflash or update XCC firmware

•

FQXSPUP4000I: Please ensure that the Management Controller [arg1] is flashed with the correct

firmware. The Management Controller is unable to match its firmware to the server.

This message is for the use case where a Management Controller firmware version does not match the
server.

Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0031

User Action:

Complete the following steps until the problem is solved:

1. Update the BMC firmware.

2. NOTE: Some cluster solutions require specific code levels or coordinated code updates. If the device

is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.

3. If problem persists, collect Service Data log.

4. Contact Lenovo Support.

•

FQXSPUP4001I: Flash of [arg1] from [arg2] succeeded for user [arg3] .

This message is for the use case where a user has successfully flashed the firmware component (MC Main
Application, MC Boot ROM, BIOS, Diagnostics, System Power Backplane, Remote Expansion Enclosure
Power Backplane, Integrated System Management).

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0035

User Action:

Information only; no action is required.

•

FQXSPUP4002I: Flash of [arg1] from [arg2] failed for user [arg3].

132

ThinkSystem SN550 V2 Messages and Codes Reference

Содержание 7X16





















































































































































































































Результаты поиска

Содержание 7X16

Отзывы:

Lenovo 7X16, Справочник, Страница: 136 / 212

Результаты поиска

Содержание 7X16

Отзывы: