Lenovo 7X16 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 212

Lenovo 7X16 Скачать руководство пользователя страница 45

Information only; no action is required.

•

FQXSPEM4020I: Fan problem detected with the enclosure/chassis. Please check the enclosure/

chassis unit fan for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5])

Fan problem detected with the enclosure/chassis

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0209

User Action:

Information only; no action is required.

•

FQXSPEM4022I: Enclosure/Chassis power supply has problem. Please check the enclosure/

chassis unit power supply for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5])

Enclosure/Chassis power supply has problem

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0210

User Action:

Information only; no action is required.

•

FQXSPEM4023I: One or more virtual drive are in abnormal status that may cause unavailable virtual

drive. Please check the event logs and if events are targeted to the same disk then replace the
drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],
[arg5])

One or more virtual drive are in abnormal status that may cause unavailable virtual drive

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0211

User Action:

Information only; no action is required.

•

FQXSPEM4024I: The RAID controller detected one or more possible configuration problem within

the subsystem. Please check the event logs and if events are targeted to the same disk then
replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],
[arg3],[arg4],[arg5])

The RAID controller detected one or more possible configuration problem within the subsystem

Severity: Info
Serviceable: No
Automatically notify Support: No

XClarity Controller events

41

«
...
43
44
45
46
47
...
»

Содержание 7X16





















































































































































































































Отзывы:

Нет отзывов