Lenovo 7X16 Скачать руководство пользователя страница 34

Страница: 34 / 212

•

FQXSPCA2017I: Sensor [SensorElementName] has transitioned to a less severe state from critical.

This message is for the use case when an implementation has detected a Sensor transition to less severe
from critical.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0523

User Action:

Information only; no action is required

•

FQXSPCA2019I: Sensor [SensorElementName] has deasserted the transition to non-recoverable

from a less severe state.

This message is for the use case when an implementation has detected that the Sensor transition to non-
recoverable from less severe has deasserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0525

User Action:

Information only; no action is required

•

FQXSPCN4000I: Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3], StopBits=

[arg4], Parity=[arg5], SessionTerminateSequence=[arg6].

A user configured the Serial Port mode

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0078

User Action:

Information only; no action is required.

•

FQXSPCN4001I: Remote Control session started by user [arg1] in [arg2] mode.

Remote Control session started

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0128

User Action:

Information only; no action is required.

ThinkSystem SN550 V2 Messages and Codes Reference

Содержание 7X16





















































































































































































































Результаты поиска

Содержание 7X16

Отзывы:

Lenovo 7X16, Справочник, Страница: 34 / 212

Результаты поиска

Содержание 7X16

Отзывы: