Lenovo 7X16 Скачать руководство пользователя страница 133

Страница: 133 / 212

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0530

User Action:

Complete the following steps:

1. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this error.

2. Reboot the system.

3. If the error continues, please contact Lenovo support to replace the system-board assembly (trained

technician only).

•

FQXSPUN0026G: Device [LogicalDeviceElementName] has been added.

This message is for the use case when an implementation has detected a Device was inserted.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0536

User Action:

Information only; no action is required

•

FQXSPUN0026I: Device [LogicalDeviceElementName] has been added.

This message is for the use case when an implementation has detected a Device was inserted.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0536

User Action:

Information only; no action is required

•

FQXSPUN0048I: The RAID controller in PCI slot [arg1] in optimal status.

This message is for the use case when an implementation has detected a Sensor transition to the normal
state.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0518

User Action:

Information only; no action is required

Chapter 2

XClarity Controller events

129

Содержание 7X16





















































































































































































































Результаты поиска

Содержание 7X16

Отзывы:

Lenovo 7X16, Справочник, Страница: 133 / 212

Результаты поиска

Содержание 7X16

Отзывы: