Lenovo 10BN Скачать руководство пользователя страница 96

Страница: 96 / 204

This section provides instructions on how to install or replace the card reader.

Note:

The card reader is only available in some models. For new installation, see “Installing the card reader”

on page 90. For replacement, see “Replacing the card reader” on page 92.

Installing the card reader

To install the card reader, do the following:

1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect

all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 80.

3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 81.

4. Locate the card reader drive bay. See “Locating internal drives” on page 72.

5. Pivot the card reader retainer to the left and slide it out of the chassis.

Figure 23. Removing the card reader retainer

6. Install the card reader retainer on the side of the new card reader.

Figure 24. Installing the card reader retainer

ThinkCentre M78 Hardware Maintenance Manual

Содержание 10BN













































































































































































































Результаты поиска

Содержание 10BN

Отзывы:

Lenovo 10BN, Руководство по техническому обслуживанию аппаратной части, Страница: 96 / 204

Результаты поиска

Содержание 10BN

Отзывы: