Lenovo 10BN, Руководство по техническому обслуживанию аппаратной части, Страница: 114 / 204

Replacing the secondary hard disk drive
Attention:
Do not open your computer or attempt any repair before reading and understanding “Important safety information”
on page 1.
Note: Your computer comes with a secondary hard disk drive bay for installing or replacing a secondary
3.5-inch hard disk drive or a 2.5-inch solid state drive. To install the solid state drive, see “Installing the
solid state drive” on page 110.
This section provides instructions on how to replace the secondary hard disk drive.
To replace the secondary hard disk drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 80.
3. Locate the secondary hard disk drive. See “Locating internal drives” on page 72.
4. Disconnect the signal cable and the power cable from the hard disk drive.
5. Pull the blue handle to release and remove the hard disk drive from the hard disk drive cage.
Figure 45. Removing the secondary hard disk drive
6. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
108
ThinkCentre M78 Hardware Maintenance Manual