Lenovo 10BN Скачать руководство пользователя страница 184

Страница: 184 / 204

10. Reconnect the front USB and front audio cables to the system board. See “Locating parts on the

system board” on page 77.

11. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 136.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 187.

Replacing the WiFi units

Attention:

Do not open your computer or attempt any repair before reading and understanding “Important safety information”
on page 1.

This section provides instructions on how to replace the WiFi units. The WiFi units include a WiFi adapter
card, a WiFi card module, and a rear WiFi antenna cable.

Replacing the WiFi units involves the following operations:

•

“Removing the WiFi adapter card” on page 178

•

“Removing the WiFi card module” on page 179

•

“Installing the WiFi units” on page 180

Removing the WiFi adapter card

To remove the WiFi adapter card, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Open the computer cover. See “Opening the computer cover” on page 136.

3. Rotate the PCI card retainer to the open position.

178

ThinkCentre M78 Hardware Maintenance Manual

Содержание 10BN













































































































































































































Результаты поиска

Содержание 10BN

Отзывы:

Lenovo 10BN, Руководство по техническому обслуживанию аппаратной части, Страница: 184 / 204

Результаты поиска

Содержание 10BN

Отзывы: