Lenovo 10BN Скачать руководство пользователя страница 190

Страница: 190 / 204

3. Hold the thicker end of the rear WiFi antenna and unscrew the WiFi antenna from the rear of the

computer.

Figure 130. Removing the rear WiFi antenna

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 187.

Installing or removing the front WiFi antenna

Attention:

Do not open your computer or attempt any repair before reading and understanding “Important safety information”
on page 1.

This section provides instructions on how to install or remove the front WiFi antenna.

Installing the front WiFi antenna

To install the front WiFi antenna, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Open the computer cover. See “Opening the computer cover” on page 136.

3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 136.

4. Remove the hard disk drive. See “Replacing the hard disk drive” on page 151.

5. Peel off the paper that protects the stickers on the front antenna.

184

ThinkCentre M78 Hardware Maintenance Manual

Содержание 10BN













































































































































































































Результаты поиска

Содержание 10BN

Отзывы:

Lenovo 10BN, Руководство по техническому обслуживанию аппаратной части, Страница: 190 / 204

Результаты поиска

Содержание 10BN

Отзывы: