Lenovo 10BN Скачать руководство пользователя страница 192

Страница: 192 / 204

7. Connect the front antenna cable to the WiFi card module.

8. Reinstall the hard disk drive. See “Replacing the hard disk drive” on page 151.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 187.

Removing the front WiFi antenna

To remove the front WiFi antenna, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Open the computer cover. See “Opening the computer cover” on page 136.

3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 136.

4. Remove the hard disk drive. See “Replacing the hard disk drive” on page 151.

5. Disconnect the front antenna cable from the WiFi card module.

6. Remove the front antenna and cable from the front of the computer.

Figure 133. Removing the front WiFi antenna

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 187.

186

ThinkCentre M78 Hardware Maintenance Manual

Содержание 10BN













































































































































































































Результаты поиска

Содержание 10BN

Отзывы:

Lenovo 10BN, Руководство по техническому обслуживанию аппаратной части, Страница: 192 / 204

Результаты поиска

Содержание 10BN

Отзывы: