Lenovo 10BN Скачать руководство пользователя страница 151

Страница: 151 / 204

7. Install the screw to secure the card reader bracket to the chassis.

Figure 85. Installing the screw that secures the card reader

8. Connect the card reader cable to one of the USB connectors on the system board. See “Locating

parts on the system board” on page 71.

9. Pivot the optical drive bay downward until it snaps into position.

10. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 136.

Note:

You might have to remove the card reader cover

from the front bezel. To remove the card read

cover, pivot the two retaining clips

that secure the card reader cover outwards and then completely

disengage the card reader cover from the front bezel.

Figure 86. Removing the card reader cover

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 187.

Chapter 10

Replacing FRUs (machine types: 2113, 2114, 2115, 3515, 4860, 4863, 4865, 4866,

4869, 5100, 10BS, 10BT, and 10BU)

145

Содержание 10BN













































































































































































































Результаты поиска

Содержание 10BN

Отзывы:

Lenovo 10BN, Руководство по техническому обслуживанию аппаратной части, Страница: 151 / 204

Результаты поиска

Содержание 10BN

Отзывы: