manualshive.com logo in svg

Lennox Core Unit Controller, Руководство по установке

Поделиться
Скачать
Lennox Core Unit Controller Скачать руководство пользователя страница 23

23

9.3.2.  Report

This  section  provides  service  reports,  system  logs,  system  profile  and  user  profile.   All  logs  and  reports  and  either  be 

downloaded to the via the W4

•  Service reports - These reports are saved to the root directory of the USB storage device.  In addition you can save the 

report to the mobile device being used and either text or email.

•  System Logs - These logs are saved to the root directory of the USB storage device.  In addition you can save the report 

to the mobile device being used or either e-mailed or use the device’s share feature. There is also an option for data 

analytic uploads as well.

• 

System and User Profile - The profile is saved to the root directory of the USB storage device.  In addition you can save 

the report to the mobile device being used or e-mailed. There is also the option in this section to load a system profile 

from USB as well.

REPORT

REPORT NAME

FILE NAME

SERVICE 

REPORT

SYSTEM 

LOGS

SYSTEM 

PROFILE

USB STORAGE

USER 

PROFILE

MOBILE

SAVE

SHARE

USB

SAVE

SHARE

REPORT NAME

FILE NAME

MOBILE

SAVE

SHARE

USB

SAVE

SHARE

SAVE USER PROFILE

LOAD USER PROFILE

Figure 25.  Report Menu Structure

9.3.3.  Advanced Control

The interface will allow for the ability to remote reset the controller.

• 

The interface shall present a confirmation dialog to the user before proceeding with the reset command

•  The interface shall indicate to the user that re-pairing will be necessary following the reboot (assuming this is necessary)

The component test functionality includes a support a “ClearDelays” functionality.

The clear delays functionality will clear timers in the CORE Control System.

The interface supports a “clear lockouts”.

Features are:

•  Remote Reset
•  Clear Delays
•  Controller Lockout - Locked or unlocked.

Содержание Core Unit Controller





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды