Leica D-LUX 109, Инструкция по эксплуатации

Страница: 288 / 302

288
Others
Q&A Troubleshooting
■
Wi-Fi function
The camera does not connect to a wireless LAN. The transmission disconnects.
•Position the camera within the communication range of the wireless LAN network.
•Connection types and security setting methods are different depending on the wireless access
point.
→ Refer to the operating instructions of the wireless access point.
•When the radio transmission is interrupted, the condition may improve by repositioning the camera
or changing the angle of the wireless access point.
•When the camera is placed on a metal table or shelf, the connection may not be established easily
because the camera is affected by radio transmission. Keep the camera away from metal surfaces.
•The automatic connection may not work when the network SSID of the wireless access point is set
not to broadcast.
→ Set the network SSID of the wireless access point to broadcast.
•Is any device, such as microwave oven, cordless phone, etc., that uses 2.4GHz frequency
operated nearby?
→ Radio transmissions may get interrupted when used simultaneously. Keep the camera
sufficiently far away from such devices.
•Is the 5GHz/2.4GHz switchable wireless access point connected to other equipment using the
5GHz band?
→ The use of a wireless access point that can use 5GHz/2.4GHz simultaneously is recommended.
It cannot be used simultaneously with this camera if it is not compatible.
•When the battery indicator is flashing red, the connection with other equipment may not start or the
connection may be disrupted. (A message such as [Communication error] is displayed.)
•Perform [Reset Wi-Fi Settings] in the [Setup] menu.