Leica D-LUX 109, Инструкция по эксплуатации

Страница: 142 / 302

142
Shutter and Drive Settings
Using Continuous Mode
Available in the following modes:
Pictures are taken in succession as long as the shutter button is pressed.
•Pictures that are taken while [Burst Rate] is set to [SH] are recorded together as a
single picture group (→198).
1
Press [ ] / ( ).
2
Press to select the continuous icon
([ ], etc.), and then .
3
Press to select the frame rate, and
then [MENU/SET].
Frame Rate
[SH]
(Super high
speed)
*
1
[H]
(High speed)
[M]
(Middle
speed)
[L]
(Low speed)
Pictures/
second
[AFS] 40 11 7 2
[AFF] / [AFC] ― 6.5 6.5 2
Live View during Continuous
Mode
None None Available Available
No. of
pictures
*
2
With RAW files ― 20
*
3 20
*
3 20
*
3
Without RAW
files
60
Depends on the capacity of the card
*
3
*
1 The electronic shutter will be activated.
*
2 The number of pictures is limited by the picture-taking conditions and the type and/or status
of the card used.
*
3 Pictures can be taken until the card becomes full. However, the frame rate will become
slower halfway through the recording. The exact timing of this depends on the aspect ratio,
the resolution, and the quality as well as the type of card used.
•The frame rate may become slower depending on the following settings:
– [Picture Size] (→108), [Quality] (→109), Sensitivity (→136), Focus mode
(→114), [Focus/Release Priority] (→125)
•The frame rate can also be set with [Burst Rate] in the [Rec] menu.
•For information about RAW files, refer to (→109).