LEGRAND Trimod 10 kVA, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 88

Trimod®
Oper
ating and M
ain
tenanc
e M
anual
23
3.1 General notes
WARNING
Before doing any operation on the equipment, it is necessary to read through the whole manual carefully, paying
attention to this chapter in particular.
The equipment has been built for the application specified in the declaration of conformity enclosed with this manual.
For no reason whatsoever it is allowed to use it for purposes other than those for which it has been designed, nor in ways
different to those explained in the manual.
The various interventions must be carried out following the criteria and chronology described in this manual.
3.2 Symbols
In this manual some operations are highlighted by graphical symbols that call the attention of the reader to the
dangerousness of the operations. The graphics are as follows:
WARNING
This means the possibility of an event happening that could lead to serious injury or great damage to the equipment
if adequate precautions are not taken.
ATTENTION
This means the possibility of an event happening that could lead to slight injury or material damage if adequate
precautions are not taken.
INDICATION
This means important information that must be read paying maximum attention.
3.3 Definitions of ‘Operator’ and ‘Specialized Technician’
The professional figure that is going to access the equipment for normal use is defined by the term “operator”.
With this definition we mean personnel who know how to use and service the equipment and have the following
requirements:
1. Specific training that authorises them to work according to the safety standards in relation to the dangers that the
presence of electricity can bring about.
2. Training on how to use the Individual Protective Devices and on the basic first aid interventions.
When the company person in charge of safety chooses the operator who is to use the equipment – who must be suitable
for work in accordance with the existing laws – he must consider the physical aspect (no impairment), the psychological
aspect (mental equilibrium, sense of responsibility) and personal education, training, experience and knowledge of the
standards, prescriptions and provisions for the prevention of accidents.
Based on the skill and capacity found, he shall also see to the operator’s training in order to give him full knowledge of the
equipment and of the parts it is made of.
To conclude, the operator must be made aware of the contents of this manual.
3.3.1 Qualification required to the operator
The operator must follow the instructions given to ensure maximum safety for himself and for the others. In particular he
must comply with all the requirements contained in this manual throughout all the operating phases.
Typical activities envisaged:
- using the equipment when it is working normally and resetting subsequent to a stop;
- taking the necessary measures to maintain performance quality;
- cleaning the equipment
- collaborating with personnel who are to see to extraordinary maintenance work (“specialized technician”).
3. Safety Provisions