LEGRAND D45 SYSTEM, Руководство по установке, Страница: 68 / 254

323005
B C
Backbone
323001
Backbone Backbone
323005
B C
To r
iser
Sec
ondar
y EP
323005
D A
Backbone
323003
on
323002 323002 EP
323005
B C A
Sec
ondar
y EP
323005
D A
From EPS
323013
323001
Backbone
Backbone
Back
bone
Back
bone
on
IN
POWER
OUT
on
on on
GENERAL RULES FOR INSTALLATION
1) When there is no riser shunt in the system, the system power supply should
be connected and set as following drawing:
2) When there is riser shunt in the system, the system power supply should be
connected and set as following drawing:
Impedance switch
on
off
Power supply
323005
4) When there is no 323013 on
the system BUS, the system
power supply on the BUS should
be connected and set as per the
following drawing: 5) When there is a Switchboard in the
system, 323001 will get power from
system BUS power supply.
The system BUS power supply should
be connected and set as per the
following drawing: 3) When there is no 323013 on
the system BUS, the system
power supply on the BUS should
be connected and set as per the
following drawing:
Power supply installation rules
60