LEGRAND D45 SYSTEM, Руководство по установке, Страница: 226 / 254

222
323015
1 2 3 4
72 mm
59,5 mm
105 mm
94 mm
33 mm
1 2 3 4
POWER
+ -
6 5 4 3
2
1
1 2 3 4
ON
OFF
D45 System
Description
Door lock accessory
Accessory device able to drive electric door lock , used to control the commonly used 12
V negative locks. When the Positive locks’ opening current is over 1 A, the device is also
needed to drive positive locks. It’s generally connected with the entrance panel to get
the door lock release control signal.
The door lock can also be released by means of an external manual switch. Possibility to
select the type of electric door lock control through the jumper line configuration. When
used to drive the negative locks, device can drive two negative locks at most. The device
also has a time delay function with 4 time delay steps, which can meet different types
of needs. DIN RAIL installation .
Technical data
Power supply: 30 Vdc
Stand by current absorption: ≤ 30 mA @ 30 V
Max operating current absorption: ≤ 30 mA @ 30 V
Stand by power consumption: 0.9 W
Operating power consumption: 0.9 W
Operating temperature: (-10)-(+40)°C
Dimensional data
Front view
Lower view
Legend
1. Open lock time delay setting DIP SWITCH
2. Lock type setting jumpers
3. 2 PIN PLUG for lock input connection (negative or positive locks)
4. 2 PIN PLUG connector for entrance panel or indoor handset control signal
connection
5.
2 PIN PLUG for external manual door lock pushbutton
6. Power input connection (DC 15 - 30 V to drive positive locks), (DC 18 - 30 V to drive
negative locks)
Lock-open time delay setting
STATUS
1 2
3 4
1 2
3 4
1 2
3 4
1 2
3 4
TIME DElAY
5 s 10 s 15 s 20 s
Lock type setting
Positive lock
Negative lock
Positive anode lock - Negative cathode lock.
Device is Factory set to drive negative cathode lock. Can drive two negative cathode
locks at the same time.
BT00461-b-en 13/05/2013