LEGRAND D45 SYSTEM, Руководство по установке, Страница: 215 / 254

211
323009
F F I I #I #I
Apartment interface
ExAMPlE (B) - If the room number is 1206 and the apartment number at each floor is 8, then device must be configured as per MODE 2 .
Configuration by inserting phisical configurators - WAY 1:
Code for the configuration place - meaning of the configuration place:
With 4 apartments at each floor and a total of not over 20 floors, you can configure as per MODE 1 (The floor number is from 1 to 20 and the apartment number is from 1 to 4); if not so,
you must use MODE 2 for the configuration.
CONFIgUrATION PlACE MODE 1 MODE 2 DIrECTIONS
CF1
FF FF FF is the Device floor number (Tens at the front)
CF2
CF3
II II II means the Device apartment number (Tens at the front)
CF4
CF5
#II
#If we have four households on each floor (tens at the front): #II is for 0 (or no configuration resistor), the default is 4 households. The
building is 20floors.
CF6
Configuration examples:
ExAMPlE (A)
- Apartment interface there are 20 floors in 323009 unit, with four houses at each floor. When the house number is 1204, 323009 can be configured as per MODE 1 .
CONFIgUrATION PlACE CONFIgUrATION vAlUE rEMArkS CONFIgUrATION DIAgrAMS
CF1 1
FF=12
F F I I #I #I
1 2 0 4 0 0
CF2 2
CF3 0
II=04
CF4 4
CF5 0 #II is configured as 0 and the system will default the
house number at each floor as 4.
CF6 0
CONFIgUrATION PlACE CONFIgUrATION vAlUE rEMArkS CONFIgUrATION DIAgrAMS
CF1 1
FF=12
F F I I #I #I
1 2 0 6 0 8
CF2 2
CF3 0
II=06
CF4 6
CF5 0
#II=08
CF6 8
BT00456-b-en 13/05/2013