Gas Type
Natural Gas (G20) Cat
I
2H
Gas Connection
8mm
Number of Injectors
One
Injector size
Stereomatic 072
Control Max Operating Temperature
80
o
c
Inlet Pressure Cold
20 mbar
Heat Input (Gross)
6.2 kW
Weight
12.5 kg
1.
Loose coals
- The ceramic coals supplied with this appliance can be replaced at service intervals depending
on their condition. If the coals do require replacement, the consumer can do so provided that the Ceramic
Component Layout Instructions (pages 16-25) are adhered to. Under no circumstances should additional/extra
coals be added. Only genuine Legend replacement parts should be used.
Order Ref:
SLC05
2.
Front Coal, Fuel Bed & Side Cheeks
- All these ceramic components can be replaced at service intervals
depending on their condition. If the coals do require replacement, the consumer can do so provided that the
Ceramic Component Layout Instructions (pages 16-25) are adhered to. Only genuine Legend replacement parts
should be used.
Order Ref:
SFC02, SCM03, SSC04
3.
Oxygen Depletion Sensing Pilot
- In the unlikely event of a pilot failure, the pilot assembly should only be
replaced by a
GAS SAFE Registered Engineer
. The user must not carry out this work.
Order Ref:
ETH01
4.
TESC Valve
- In the unlikely event of valve failure, the assembly should only be replaced by a
GAS SAFE Registered Engineer
. The user must not carry out this work.
Order Ref:
ETH02
5.
Handset
- Order Ref:
ETH03
TECHNICAL DATA
8
REPLACEMENT PARTS
