LOG LAYOUT INSTRUCTIONS
22
1. Place the main fuel bed on to the middle section of the metal
burner tray. It is important that the front edge of the fuel bed is
located behind the burner strip (Fig. 36).
2. Position the front log set on the front log retainer, making sure
that the back edge is pushed up against the front of the burner
strip (Fig. 37).
3. Following Figs. 38 to 46, place the loose logs on to the fuel bed.
It is important that the logs ‘nest’ together and sit on top of the fuel
bed peaks.
It is very important that all the logs are used and arranged as
shown in order to achieve the desired flame picture.
It may be necessary to remove some or all of the logs to clean
them at some time. Cleaning must only be done using a soft
brush.
CAUTION:
The logs are extremely fragile and must be handled
accordingly. Gloves should be worn and any inhalation of dust
should be avoided. Never put additional logs on the fire. Never
use logs other than those originally supplied, or genuine
Legend Spare Parts.
Fig. 36
Fig. 37
Fig. 38
Fig. 39
Fig. 40
Fig. 41
Fig. 42
Burner Strip
Main Fuel Bed
Fig. 43
3
6
16
9
14
13
15
10
8
8
Right Hand
Side Cheek
Left Hand
Side Cheek
Front Log Set
