BILS-10003 rev E
22
305
User Interface wiring connections
Caution: Before making user interface wiring connections – insure UPS is off, and AC
input power and batteries are disconnected.
The UPS has a complete user interface, located on the back panel of the Herytage UPS. The
user interface consists of:
Feature
Description
Call in, phone line modem
jack (Optional)
Allows you to dial in and diagnose power
monitoring history, alarm and inverter logs and
parameter settings.
10 pin user connection block Dual dry contacts for inverter and alarm
monitoring, Emergency Power Off, Remote On /
Off, 12VDC power supply, AS 400
9 pin RS 232 UPS
monitoring and control port
Used for control and monitoring via terminal or
computer with terminal emulation software.
RJ – 45 in /out
Network phone line protection
Installation of electrical wiring should be completed by a qualified electrician
. National
electrical code and applicable local codes should be followed.