BILS-10003 rev E
31
504-3
Key Functions
504-3-1 Display
To display a parameter press
:
Display,
Parameter #
Note: All parameters can be displayed with no password
504-3-2 Program
To program a parameter press:
Display,
Parameter #,
Program,
New Value, Enter
504-3-3 UP / Down keys
Once a parameter is displayed, you can use the up/down arrows to scroll through
parameter list (see section 605).
504-3-4 Clear
Used to clear or reset parameters, counters, power quality / alarm logs, and to
clear alarms.
504-3-5 . (decimal point)
Used to display the power quality / alarm logs
–
The event log will record: power
quality events and alarms. The event log will show the Event #, Event type, Event
date, Event time. Must start at the System status mode hit (esc) key. You can scroll
through the events by using the UP / Down arrow, the first event shown will be the
most recent event.
504-3-6 Escape
Used to back out of the power quality / alarm log mode, programming mode, or
display mode (back to system status mode).
