WaveRunner 6 Zi Oscilloscopes
51
WR6Zi-GSM-E
Actions for Trace Buttons
Several dialogs contain common functions accessible from a row of
buttons that can save you a step or two when using a particular function
(instead of accessing the respective location from the menu bar or the
Signal Display Grid Pop-Up Menu).
For example, at the bottom of the Channel Setup dialog, these buttons
(sometimes labeled as
Actions
) perform the following functions:
Measure
- Opens the Measure menu. You can then select a
parameter from this menu without leaving the Channel Setup
dialog. The parameter automatically appears below the grid.
Zoom
- Creates a zoom trace of the channel trace whose dialog is
currently displayed.
Math
- Opens the Math menu. You can then select a math
function from this menu without leaving the Channel Setup dialog.
A math trace of the channel whose dialog is currently open is
automatically displayed.
Decode
- Opens the main Serial Decode dialog where protocol
option measurements can be applied to signals.
Store
- Loads the channel trace into the next available memory
location (M1 to M4).
Find Scale
- Automatically performs a vertical scaling that fits the
waveform into the grid.
Next Grid
- Automatically moves the channel trace whose dialog is
currently open onto the next grid. If you have only one grid
displayed, a new grid will be created automatically, and the trace
moved.
Label
- Enables you to attach identifying labels to your waveforms.
The labels are preserved when the waveform is saved as a
LabNotebook entry and when saved to file.
Probe Cal - Cable Deskew
- Opens the Probes Cal. dialog where
various Gain, Offset, Skew, Source, and Advanced controls are
available for probe signal calibration.
