WaveRunner 6 Zi Oscilloscopes
97
WR6Zi-GSM-E
Zooming Waveforms
Zooming Waveforms Overview
You can magnify a selected region of a waveform using the Zoom
function. You can display up to four Zoom (Z1 - Z4) and eight Math Zoom
traces (F1 - F8).You can zoom:
a single channel (known as
To Zoom a Single Channel
(on page
98))
a math or memory trace (known as
Zooming Memory or Math
Function Traces
)
multiple waveforms at once (known as
To Zoom Multiple
Waveforms Quickly
(on page 100))
segments in a sequence (found in
Sampling Modes → Sequence
Sampling Mode
(on page 56)
You can also use the Multi-Zoom Math function to create time-locked
zoom traces for selected waveforms using
Multi-Zoom
.
At any time, you can zoom a portion of a channel waveform or
Memory/Math function trace by touching and dragging a rectangle
around any part of the input waveform, see the
To Zoom by Touch-and-
Drag
(on page 100) topic. The zoom trace will size itself to fit the full
width of the grid. The degree of magnification, therefore, will depend on
the size of the rectangle that you draw.
You can also use the front panel
Q
UICK
Z
OOM
button to create multiple
zooms, one for each displayed input channel. For more information, see
the
To Zoom Multiple Waveforms Quickly
(on page 100) topic.
