LeCroy Sierra M6-2, Руководство пользователя

Страница: 338 / 480

LeCroy Corporation Scenario Actions
336 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
TABLE 4.3: Test State Actions
Action Description
Beep
Emits audible sound of duration selectable via drop ‐
down list.
Branch to
Existing State
1 Go to a state in this sequence that is already
defined.
1
New State
1 Go to a state in this sequence that is not yet defined
(you need to define it).
1
Capture Data DWORD Captures a data DWORD into one of four registers.
Inject CRC Error Injects a CRC error into the line.
Invalid 10bit ‐ code
Error
Injects invalid 10b code into the line.
Running Disparity
Error Injects a Running Disparity (RD) error into traffic.
Insert Address Frame
FIS Frame
SAS Primitive
SMP Frame
SSP Frame Inserts a frame or primitive.
Insert DWORD Inserts DWORD.
Link Disconnect Puts both InFusion SAS ports at electrical idle
immediately.
Reconnect Starts traffic pass ‐ through immediately. This action
restarts traffic after a previous disconnect command.
Once traffic is passing through, the initiator and
target resume OOB signaling.
Monitor/Count Opens a window to count the number of events that
occur during a session. A session is a time interval
during which a scenario runs.
Remove Frame Partially
Primitive
Whole Frame Removes the targeted event from the traffic.
Restart
All Sequences
1
Restart all sequences in the scenario.
1
Current Sequence
1
Restart the sequence that contains this action
definition.
1
SNW Speed Negotiation
Retime Set RCDT, SNTT, ALT/TLT, TX speed, TRAIN/
TRAIN_DONE pattern, and/or PHY Capability.
Speed Negotiation
Violation Set Violation Type.
Stop Scenario Stops all scenario activity.
Substitute Data DWORD Substitutes a data DWORD in the traffic.
with SAS Primitive Substitutes a SAS primitive in the traffic.
with SATA Primitive Substitutes a SATA primitive in the traffic.