LeCroy Sierra M6-2, Руководство пользователя

Страница: 191 / 480

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 189
Target and Device Emulation LeCroy Corporation
1. To enable Asynchronous notification, check the Support Asynchronous notification
feature, and then specify the millisecond Asynchronous notification interval and
the Maximum number of transmitted Asynchronous notifications .
2. To send a BIST frame, check Send BIST frame and enter a value for the millisecond
Delay before sending BIST FIS . Choose BIST flag options and enter or select DATA or
test pattern.
3. To support smart features, check Support smart feature set .

For self test, check Enable smart self test .

For error logging, check Enable error logging .

To return user data for READ DATA, check READ DATA returns user data .

To set threshold, enter an integer in Threshold exceeded . To never exceed threshold,
enter 0 .
4. To enable Transmit Spread Spectrum Clocking, check Enable Transmit SSC .
Project Note
Click the Notes tab and enter a Project Name and a brief description of the Device
Emulation project (see “Add a Project Note” on page 100 ).
Using the Power Expansion Card
You can use the Power Expansion Card for Emulation. See “Using the Power Expansion
Card” on page 30 .
Run Device Emulation
Click the Activate Device button to start emulation.
Note:
You can run the analyzer while device emulation is active to monitor bus traffic.