mc²96 Installation & Service Guide
Version: 1.0/3
34/65
4. Installation
4.16
Front Buffer Connections
The following connections can be found on the front buffer (beneath the trackball).
1 x ETH A Network Port
Connects to the control surface internal network (ETHERNET A).
4 x USB 2.0 Ports
·
3 x USB - connect to the mc
2
control system. One port should be reserved for the wireless keyboard
dongle. The other ports can be used to connect a USB memory stick (to save and load user data).
·
1 x USB (marked RTW) - connects to the RTW TM9 meter. Please refer to the TM9 user manual.
1 x Stereo Phones (HP 1)
This stereo phones output can be used to connect a pair of stereo headphones. The socket is wired from the
Headphone 1 output which, by default, follows the MON 1 source selector (controlled from the MONITORING
touch-screen).
1 x Stereo Phones (HP 2)
A second stereo phones socket (Headphone 2) can be found further along the arm rest. By default, this is
follows the MON 2 source selector (controlled from the MONITORING touch-screen).
2 x Stereo Phones (HP 3 & HP 4)
On larger frames, two additional phones connectors operate in parallel with Headphones 1 & 2.