LAWO mc296 Скачать руководство пользователя страница 20

Страница: 20 / 65

mc²96 Installation & Service Guide

Version: 1.0/3

20/65

4. Installation

4. Installation

This chapter describes how to install the control surface.

4.1

Unpacking

If the control surface comprises more than one frame, then each frame is delivered separately. All included
accessories are shipped in the "Accessories" box. Any optional components are delivered in their own packing
boxes.

Please check the contents of the shipping boxes, and in the event of any transport damage, contact your local
Lawo representative or email

[email protected]

4.2

Packing List

Included

The following items are included with the control surface (in the "Accessories" box):

2 x 2m IEC power cables (country-specific)

- to connect mains power to the frame. If the surface

contains more than one PSU block, then additional IEC power cables are supplied.

1 x Logitech wireless keyboard + USB dongle

- to be installed as the console keyboard. The USB

cable is included for charging purposes.

1 x dust-cover

- to protect the console when not in use.

1 x tool case + tools

- for performing service procedures.

1 x USB memory card

- containing the latest software and configuration files.

If you have ordered the studio version, then this comes with the console stand: 2 x detachable legs + mounting
plates.

Optional

The following items must be ordered separately.

SFP modules

- for the MADI and RAVENNA/AES67 ports.

Removable Script Tray (978/68)

Содержание mc296


































































Результаты поиска

Содержание mc296

Отзывы:

LAWO mc296, Инструкция по установке и обслуживанию, Страница: 20 / 65

Результаты поиска

Содержание mc296

Отзывы: