LAUNCH
X-431 PAD V
User's Manual
71
<2> REF settings
Reference waveforms are saved waveforms to be selected for display.
The reference function will be available after saving the selected
waveform to non-volatile memory.
Tap
and then [REF] to enter the REF setting screen.
Fig. 7-31
Tap < or > to select the desired reference value for time/DIV and volts/
DIV. To show or hide the REF, just check/uncheck the box before On/
Off.
<3> Display settings
Tap
and then [Display settings] to enter the setting screen.
Fig. 7-32
Select “Vectors” or “Dots” to display waveforms as vectors or dots.
Check / uncheck the box before Grid to turn on/off grid display.
7.3.4.4 Measure
<1> Channel source
Tap
and then [Source], a screen similar to the following will appear.
Fig. 7-33
<2> Horizontal / Vertical measure
Horizontal Measure / Vertical Measure are used to measure voltage
parameter and time parameter respectively. Drag A line upwards or
downwards to control voltage. Move A line left or right to fine-tune
timebase. A line is a solid line and B line is a dotted line.
Tap
and then [Horizontal Measure], a screen similar to the
following will appear.
