LaserBit LB Pinto E1, Руководство пользователя

Страница: 7 / 29

LB Pinto 400 V3 29/7
1 Introduction
This manual describes the LaserB i t LB Pinto series of free space laser
transmission system including the following models:
E100 E100TP
E1 E2
E10 E3
E10TP
The LaserB i t-Pinto product range offers cost effective, reliable free space laser
transmission for 2Mbps up to 155Mbps data through the air, where a clear line
of sight is available. It delivers the most effective point-to-point connection
between computer networks, or telephone exchanges.
No need for installing cables, no rental cost, no licensing requirement.
Ideal for urban areas or city centres, where the use of leased lines is expensive.
Suitable for factories or industrial environments where high noise levels can
interfere with transmitted data. The best choice to make a connection across
river and other natural or artificial obstacles, where cable is not available.
The transmission technique used in the
LaserB i t FSO devices provides
transparent and wire speed data transfer with virtually zero latency. Because
they use infrared light as transmission medium,
LaserB i t systems do not require
frequency licenses and the transmission is not affected by electro-magnetic or
radio-frequency interference. Basically, the
LaserB i t link can be considered as a
virtual fiber in the air, which ends in real fiber optic cable at both ends.
Our product is built using high quality electronic components for operation in
even the most adverse conditions.
Metal housing gives a robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air
isolation.
The
LaserB i t Pinto system comprises of two Pinto Type Laser Heads and two
Outdoor Interconnection Units (OIU) – one at each end. The interface
connections are housed in the OIU together with the PSU of the system.