LaserBit LB Pinto E1, Руководство пользователя

Страница: 26 / 29

LB Pinto 400 V3 29/26
5 Warranty conditions
LaserBit Communications Corp. warrants that the LaserBit product purchased
will free from defects in material and workmanship for a period of one (1) year
from the date of purchase. This warranty period will not be extended by virtue
of a repair of the product or a replacement of any component of the product
during the warranty period.
This warranty covers only normal commercial use. LaserBit Communications
Corp. is not responsible for warranty service should the LaserBit identification
marks, serial numbers or original seals be removed, altered, or broken, or should
the product fail to be properly maintained or fail to function properly as a result
of any modification, misuse, abuse, improper installation, neglect, improper
shipping, damage caused by disasters such as fire, flood, earthquake or
lightning, improper electrical current, or service other than by LaserBit
Communications Corp. or its authorised partners.
If the LaserBit product fails to operate as warranted at any time during the
warranty period, LaserBit Communications Corp. will repair, or at its option,
replace the defective product at no additional charge.
In no event will LaserBit Communications Corp. be liable for any damages
including loss of data, lost profits, lost savings, lost business, or other
incidental or consequential or indirect damages arising out of the
installation, use, maintenance, performance, failure or interruption of the
LaserBit product, even if LaserBit Communications Corp. has been advised
of the possibility of such damage.
If you purchased the LaserBit product in the United States, some states do not
allow the limitation or exclusion of liability for incidental or consequential
damages, so the above limitation may not apply to you.
The purchaser or user shall have the responsibility to give LaserBit
Communications Corp. prompt written notice of any warranty claims. If the
product was purchased through an authorised partner of LaserBit
Communications Corp., notice may be given in writing to that authorised partner
in the area in which the product was being used.
The product may be returned to LaserBit Communications Corp. only if it has a
Return Material Authorisation (RMA) number. The product must be shipped
prepaid, insured and in the original shipping package or similar package for safe
shipment. The RMA number must be marked on the outside of the shipping
package. Any product returned without an RMA number shall be rejected.
Transportation charges for the return of the product will be paid by LaserBit
Communications Corp. if it is determined by LaserBit Communications Corp.