9
NOVA MIX 2K
English
D
Before lifting the machine, check the position of
the handle (D1).
If necessary, remove the handle or secure it to the
structure of the machine (D2)
TRANSPORT AND UNPACKING
• The packed parts should be handled as indicated in the
symbols and markings on the outside of the packing.
LIFTING POINTS
There are no precise lifting points for lifting the machine in its
entirety.
In order to determine the most appropriate lifting points, refer to
the geometric characteristics of the machine itself.
Make sure that the pull position of the
synthetic fibre belt does not interfere with
any of the machine’s fragile elements
which could be damaged from the tension
produced during lifting.
All of the operations described in this paragraph
must be performed by qualified technicians who
have been trained for the task required.
Before lifting and moving the machine, make sure
that the equipment being utilised is of an adequate
size to bear the weight of the machine and its
components.
Do not stand beneath or near the machine while
it is being lifted.
Lift the machine slowly and check that it is properly
balanced with respect to its centre of gravity.
While being moved, the machine should only be
lifted to the minimum necessary height.
• Before installing the equipment, ensure that the area to
be used is large enough for such purposes, is properly
lit and has a clean, smooth floor surface.
D1
D2
