32
NOVA MIX 2K
English
SIEMENS
HELP
ESC
ACK
ENTER
SHIFT
TAB
INS
DEL
+ / -
SIMATIC PANEL
F3
F4
F2
F1
K1
recirculation
recirculation
A
LARIUS NOVA MIX
OUTPUT GUN
PRODUCT A
CATALYSER B
GHIBLI
WASH
recirculation
B
L
A
B
L
Control settings
Pot life (min)
00
Enable tapping cycle 0
Number of tapping cycles 000 000
F3
List of fields:
•
T1
: 1° thinner time washing.
•
EV L:
wash electrovalve manual control.
•
EV A:
material A electrovalve manual control.
•
EV B:
material B electrovalve manual control.
POT LIFE
The proper setting of the wash cycle guarantees
the cleanliness of the mixing lines and prevents
problems due to the solidification of the
components within the machine.
Tturn the selector (
K1
) to MAN and press the WASH button (
K2
)
in order to activate the wash cycle.The machine will start the
wash cycle.
The operator must keep the spray-gun open until the cycle has
completed.
During the wash cycle, the message WASH IN PROGRESS will
appear on the display. Once the cycle has completed the message
WASH TERMINATED will appear.
If the operator notices that the equipment has not
been thoroughly washed, the settings must be
corrected and the wash cycle must be repeated.
This wash cycle must be performed whenever
work has been completed and the machine is not
expected to be used for a number of hours. This
down time can be judged based on the pot life of
the components being used
(i.e. at the end of the
working day or before lengthy pauses).
If one or both of the components is changed, perform a complete
washing cycle in the entire
LARIUS NOVA MIX 2K
system,
starting from the flow pumps. The wash fluid must be drawn into
the system directly from the pumps and circulated throughout
the entire system.
If component
A
requires a different wash fluid than catalyser
B
, the
manual controls must be used in order to allow specific lines to be
left open while others are kept closed. This will prevent unwanted
reactions between the different components.
When cleaning the machine, make sure that the
wash fluid is compatible with the data sheets of
the products (A and B) being utilised.
List of fields:
•
Pot life
: safety time for wash alarm.
Only upon request:
•
Enable tapping cycle
: enables the control cycle.
•
Number of control cycles
: allows the user to set the number
of desired tappng cycles.
CONTROL SETTINGS SCREEN (1)
Before initiating any work activities, always make
sure that this field is set properly in relation to
that which is specified in the data sheets of the
products being utilised.
Incorrect settings could lead to the solidification
of the mixed product within the mixing lines.
tapping
K2