3
NOVA MIX 2K
English
A
A
T
E
C
H
N
IC
A
L
D
A
TA
T
E
C
H
N
IC
A
L
D
A
TA
B
B
T
E
C
H
N
IC
A
L
D
A
TA
T
E
C
H
N
IC
A
L
D
A
TA
W ATER
S OLVENT
- The operator must possess and be familiar with the
data sheets of the 2 components (
A
and
B
).
- The operator must be familiar with the characteristics
of both the wash fluid to be used with the catalyser
B
,
and the wash fluid to be used with the product
A
.
ATENTION
- The catalyser and its relative circuit must never be
cleaned with incompatible liquids.
- Make sure that: if the product to be used is water-based,
the relative circuit within the machine is cleaned using
water. If, on the other hand, the product to be used is
solvent-based, the relative circuit must be cleaned using
a solvent.
BEFORE USING THE LARIUS MIX 2K EQUIPMENT
LARIUS srl SHALL BEAR NO RESPONSIBILITY FOR ANY EVENTUAL DAMAGES DERIVING FROM THE USE OF
WASH FLUIDS INCOMPATIBLE WITH PRODUCTS
A
AND/OR
B
.
LARIUS srl SHALL BEAR NO RESPONSIBILITY FOR ACCIDENTS OR MALFUNCTIONS DERIVING FROM LACK
OF FAMILIARITY WITH THE DATA SHEETS AND THE PRODUCTS UTILISED OR RESULTING FROM THE USE OF
PRODUCTS WHICH ARE NOT COMPATIBLE WITH ONE ANOTHER.
A
WORKING PRINCIPLE
The
LARIUS NOVA MIX 2K
is a bi-component mixing machine.
It therefore provides for the dosage, mixture and application of
bi-component products.
This machine allows the user to work in high pressure with manual
or automatic spray-guns.
The dosing and the mixing of the components are regulated by
an electronic control system. The hydraulic unit contains two
flowmeters which regulate the input of the two components into
the mixing lines. It is here, thanks to a static mixer, that the mixing
of the products takes place.
The machine is made up of 4 main units:
• The pump for the components unit
• The hydraulic mixing unit
• The command and control unit
• Equipment supply
ADVANTAGES OF USING THE LARIUS MIX 2K
• Increased product savings and consequent waste disposal
savings.
• “Ecological” painting: performed in complete respect for the
working and external environment – Quick drying
(even without
a drying oven)
.
• High quality finish – Less use of paint thinners during cleaning
phases.
• Increased resistance with respect to mono-component paints.
• A product mixed at the moment is easier to lay.
• Low solvent consumption for high dry residue of 2-component
paint.
• Easy integration in workplace.
• Alarm signals in the event of malfunction.
• Easy and quick cleaning.
• The operator manually mixes paints, catalysts, solvents.
• Paint dries rapidly, even without oven.
• Powers multiple manual-automatic guns simultaneously.
• Only authorised personnel can set machine parameters.
Fields of application:
Generic metalworking, Woodworking
and Furnishings, Aerospace industry, Plastics, Bicycles and motor-
cycles, Automobile components, Machines, Painting of furniture,
Varnishing, Emulsion painting.
Treatable products:
• Low, medium and high viscosity products.
• Water- and solvent-based products.
• 2-component epoxy paints and primers.
• 2-component polyurethane paints and primers.
• 2-component high solid