LAPIS Semiconductor ML610472, Руководство пользователя

Страница: 54 / 281

ML610471/472/473/Q471/Q472/Q473 User's Manual
Chapter 4 MCU Control Function
4-6
4.2.5 Block Control Register 1 (BLKCON1)
Address: 0F029H
Access: R/W
Access size: 8-bit
Initial value: 00H
7 6 5 4 3 2 1 0
BLKCON1 — DCAPR — — — — — —
R/W R/W R/W R/W R/W R/W R/W R/W R/W
Initial value 0 0 0 0 0 0 0 0
BLKCON1 is a special function register (SFR) to control each block operation.
[Description of Bits]
•
DCAPR (bit 6)
The DCAPR bit is used to control Capture operation.
DCAPR Description
0 Enable operating Capture (initial value)
1 Disable operating Capture
Note:
•When any flag is set to "1" (disable operation), the function of the applicable block is reset (all registers are
initialized) and the clock supply to such block stops. When this flag is set to "1", the writing to all registers in the
applicable block becomes invalid, and thus the reading from such register becomes the initial value. When using the
function of the applicable block, ensure to reset the applicable flag of this block control register to "0" (enable
operation).
•See Chapter 8, “Capture” for detail about operation of Capture.