Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
77
of
272
Command
:
poe
Description
:
Configure Power Over Ethernet (
before FW VB7.10.2658
).
Syntax
:
poe
capacitor-detection
poe
management mode { class-consumption | class-reserved-power | allocation-consumption | allocation-
reserved-power | lldp-consumption | lldp-reserved-power }
poe
ping-check { enable | disable }
poe
profile id <id> name <entry_name>
poe
profile id <id> { [ Sun <hour_v00_0_to_23> <min_v00_0_to_55> <hour_v01_0_to_23> <min_v01_0_to_55> ]
[ Mon <hour_v10_0_to_23> <min_v10_0_to_55> <hour_v11_0_to_23> <min_v11_0_to_55> ] [ Tue
<hour_v20_0_to_23> <min_v20_0_to_55> <hour_v21_0_to_23> <min_v21_0_to_55> ] [ Wed
<hour_v30_0_to_23> <min_v30_0_to_55> <hour_v31_0_to_23> <min_v31_0_to_55> ] [ Thr
<hour_v40_0_to_23> <min_v40_0_to_55> <hour_v41_0_to_23> <min_v41_0_to_55> ] [ Fri
<hour_v50_0_to_23> <min_v50_0_to_55> <hour_v51_0_to_23> <min_v51_0_to_55> ] [ Sat
<hour_v60_0_to_23> <min_v60_0_to_55> <hour_v61_0_to_23> <min_v61_0_to_55> ] }
poe
reboot-chip mode { enable | disable }
poe
reboot-chip { [ Sun <hour_v00_0_to_23> <min_v00_0_to_55> ] [ Mon <hour_v10_0_to_23>
<min_v10_0_to_55> ] [ Tue <hour_v20_0_to_23> <min_v20_0_to_55> ] [ Wed <hour_v30_0_to_23>
<min_v30_0_to_55> ] [ Thr <hour_v40_0_to_23> <min_v40_0_to_55> ] [ Fri <hour_v50_0_to_23>
<min_v50_0_to_55> ] [ Sat <hour_v60_0_to_23> <min_v60_0_to_55> ] }
Parameters
:
capacitor-detection
PoE legacy mode on
management
Use management mode to configure PoE power management method.
ping-check
Enable/Disable POE Ping Check.
profile
poe scheduling profile
reboot-chip
poe schedules to reboot PoE chip
allocation-consumption Max. port power determined by allocated, and power is managed according to power
consumption.
allocation-reserved-power Max. port power determined by allocated, and power is managed according to
reserved power.
class-consumption Max. port power determined by class, and power is managed according to power
consumption.
class-reserved-power Max. port power determined by class, and power is managed according to reserved
power.
lldp-consumption Max. port power determined by LLDP Media protocol, and power is managed according
to power consumption.
lldp-reserved-power Max. port power determined by LLDP Media protocol, and power is managed according
to reserved power.
Example
:
SISPM1040-582-LRT(config)#
poe ping-check enable
SISPM1040-582-LRT(config)#
poe management mode alloc
allocation-consumption allocation-reserved-power
SISPM1040-582-LRT(config)#
poe management mode allocation-
allocation-consumption allocation-reserved-power
SISPM1040-582-LRT(config)#
$e management mode allocation-reserved-power ?
<cr>
SISPM1040-582-LRT(config)#
$e management mode allocation-reserved-power
SISPM1040-582-LRT(config)#
