Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
20
of
272
Command
:
logging
Description
:
Clear System logging messages.
Syntax
:
clear
logging [ info ] [ warning ] [ error ] [ emerg ] [ alert ] [ crit ] [ notice ] [ debug ] [ switch <switch_list> ]
clear
logging flash
Parameters
:
alert
Severity 1: Action must be taken immediately
crit
Severity 2: Critical conditions
debug Severity 7: Debug-level messages
emerg Severity 0: System is unusable
error Severity 3: Error conditions
flash
Clear all logging messages on Flash
info Severity 6: Informational messages
notice Severity 5: Normal but significant condition
warning Severity 4: Warning conditions
<cr>
Example
:
SISPM1040-582-LRT#
clear logging?
logging System logging message
<cr>
SISPM1040-582-LRT#
clear logging debug
SISPM1040-582-LRT#
Command
:
mac
Description
:
Clear MAC Address table.
Syntax
:
clear
mac address-table
Parameters
: address-table
Flush MAC Address table.
Example
:
SISPM1040-582-LRT#
clear mac address-table
SISPM1040-582-LRT#
Command
:
mep
Description
:
Clear Maintenance Entity Point.
Syntax
:
clear
mep <inst> { lm | dm | tst | bfd }
Parameters
: <uint>
The MEP instance.
bfd
Clear G.8113.2 BFD CC/CV statistics counters.
dm
Clear DM measuring information.
lm
Clear LM measuring information.
tst
Clear TST measuring information.
Example
:
SISPM1040-582-LRT#
clear mep 1 dm
Error: MEP instance is not enabled
SISPM1040-582-LRT#