Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
217
of
272
Command
:
green-ethernet
Description
:
Configure Green ethernet (Power reduction) for an interface.
Syntax
:
green-ethernet
eee optimize-for-power
Parameters
:
eee
Powering down of PHYs when there is no traffic.
optimize-for-power
Set if EEE optimized for least power consumption (else optimized for least traffic
latency).
<cr>
Example
:
SISPM1040-582-LRT(config)#
green-ethernet eee optimize-for-power
SISPM1040-582-LRT(config)#
Command
:
gvrp
Description
:
Enable GVRP on interface or interfaces.
Syntax
:
gvrp
gvrp
max-vlans <maxvlans>
gvrp
time { [ join-time <jointime> ] [ leave-time <leavetime> ] [ leave-all-time <leavealltime> ] }*1
Parameters
: max-vlans Number of simultaneous VLANs that GVRP can control
<1-4095>
Number of VLANs max.
time
Configure GARP protocol timer parameters. IEEE 802.1D-2004, clause 12.11.
join-time Set GARP protocol parameter JoinTime.
<1-20>
Join-time in units of centi seconds. Range is 1-20. Default is 20.
leave-all-time Set GARP protocol parameter LeaveAllTime.
<1000-5000> leave-all-time in units of centi seconds Range is 1000-5000. Default is 1000.
leave-time Set GARP protocol parameter LeaveTime.
<60-300> leave-time in units of centi seconds. Range is 60-300. Default is 60.
<cr>
Example
:
SISPM1040-582-LRT(config-if)#
gvrp
SISPM1040-582-LRT(config)#
gvrp max-vlans 500
SISPM1040-582-LRT(config)#
gvrp time join-time 10
SISPM1040-582-LRT(config)#
gvrp time leave-all-time 3000
SISPM1040-582-LRT(config)#
gvrp time leave-time 100
SISPM1040-582-LRT(config)#
gvrp time join-time 10 leave-all-time 3000 leave-time 100
SISPM1040-582-LRT(config-if)#