Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
100
of
272
Command
:
transmit
Description
:
Configure Spanning tree transmit hold-count
Syntax
:
hold-count
Max number of transmit BPDUs per second.
Parameters
: <1-10>
1-10 per second, 6 is default
Example
:
SISPM1040-582-LRT(config)#
spanning-tree transmit hold-count 5
SISPM1040-582-LRT(config)#
Message: Could not set MSTP port conf
Command
:
switchport
Description
:
Set switching mode characteristics.
Syntax
:
switchport
vlan mapping <gid> <vlan_list> <tvid>
Parameters
: vlan
VLAN
mapping
Add VLAN translation entry into a group.
<1-10>
Group id
<vlan_list>
Original vlan-list
<vlan_id>
<cr>
Example
:
SISPM1040-582-LRT(config)#
switchport vlan mapping 1 100-300 10
SISPM1040-582-LRT(config)#
switchport?
switchport vlan mapping <gid> <vlan_list> <tvid>
SISPM1040-582-LRT(config)# switchport vlan mapping 1 10 100
Messages
:
%% Failed to add VLAN Translation mapping.