Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
65
of
272
Parameters
:
<1-100>
The MEP instance number.
os-tlv
Organization-Specific TLV
ais
Alarm Indication Signal
aps Automatic Protection Switching protocol.
cc Continuity Check.
ccm-tlv The CCM TLV enable/disable
client
dm Delay Measurement.
down This MEP is a Down-MEP.
lb Loop Back.
lck Locked Signal.
level The MEG level of the MEP.
link-state-tracking Link State Tracking. When LST is enabled in an instance, Local SF or received 'isDown' in
CCM Interface Status TLV, will bring down the residence port. Only valid in Up-MEP.
The CCM rate must be 1 f/s or faster.
lm Loss Measurement.
lm-avail
Availability for Loss Measurement
lm-hli High Loss Interval for Loss Measurement
lm-notif Loss Measurement JSON notifications
lm-sdeg Signal Degrade for Loss Measurement
lt Link Trace.
meg-id The ITU/IEEE MEG-ID.
mep-id The MEP-ID.
mip This MEP instance is a half-MIP.
peer-mep-id The peer MEP-ID.
performance-monitoring Performance monitoring Data Set collection (MEF35).
syslog
Enable syslog.
tst
Test Signal
up This MEP is a UP-MEP.
vid The MEP VID.
voe MEP is VOE based.
fr1m
Frame rate is 1 f/min.
fr1s
Frame rate is 1 f/s.
protect
The AIS can be used for protection. At the point of state change three AIS PDU is
transmitted as fast as possible.
<0-7>
Priority in case of tagged OAM. In the MPLS and EVC domain this is the COS-ID.
<0-7>
Priority in case of tagged OAM. In the MPLS and EVC domain this is the COS-ID.
domain
Client flow domain.
evc
EVC client flow.
lsp
MPLS-TP LSP client flow.
vlan
VLAN client flow.
flow
Client flow instance.
<uint>
Client flow instance number value.
ais-prio
AIS injection priority.
lck-prio
LCK injection priority.
level
The MEG level on the client layer.
<0-7>
AIS injection priority value.