Lantronix SISPM1040-582-LRT, Руководство пользователя

Страница: 168 / 272

Lantronix SISPM1040-582-LRT CLI Reference
33757 Rev. J https://www.lantronix.com/ Page 168 of 272
Command
:
loop-protect
Description : Show Loop protection configuration.
Syntax : show loop-protect [ interface ( <port_type> [ <plist> ] ) ]
Parameters : * All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_list> Port list in 1/1-10
Example :
SISPM1040-582-LRT#
show loop-protect interface GigabitEthernet 1/10
Loop Protection Configuration
======================================
Loop Protection : Disable
Transmission Time : 5 sec
Shutdown Time : 180 sec
GigabitEthernet 1/10
------------------------------
Loop protect mode is enabled.
Action is shutdown.
Transmit mode is enabled.
No loop.
The number of loops is 0.
Status is down.
SISPM1040-582-LRT#
show loop-protect interface GigabitEthernet 1/10
Loop Protection Configuration
======================================
Loop Protection : Enable
Transmission Time : 5 sec
Shutdown Time : 180 sec
------------------------------
Loop protect mode is enabled.
Action is log only.
Transmit mode is disabled.
No loop.
The number of loops is 0.
Status is down.
SISPM1040-582-LRT#
show loop-protect interface GigabitEthernet 1/1
Loop Protection Configuration
======================================
Loop Protection : Enable
Transmission Time : 5 sec
Shutdown Time : 180 sec
GigabitEthernet 1/1
------------------------------
Loop protect mode is enabled.
Actions are both of shutdown and log.
Transmit mode is enabled.
No loop.
The number of loops is 0.
Status is down.
SISPM1040-582-LRT#