Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
263
of
272
Appendix C Percepxion and LPM Commands
Percepxion is Lantronix on-premise and cloud-hosted management platform that provides a single pane of glass
for centralized management and automated monitoring of all deployed Lantronix Remote Environment
Management and IoT products, along with real-time notifications, managed APIs and data dashboards.
For more information see
https://www.lantronix.com/percepxion/
. Percepxion support requires switch firmware
VB7.20.0191 or above.
Lantronix Provisioning Manager (LPM) is a software application that provisions, configures, and updates Lantronix
devices for local site installations and deployments. LPM discovery is enabled by default and is not configurable.
https://www.lantronix.com/products/lantronix-provisioning-manager/
To enter Percepxion Config mode from Config mode:
SISPM1040-582-LRT(config)#
percepxion
<cr>
SISPM1040-582-LRT(config-percepxion)#
To display the set of available commands enter a ? (question mark):
SISPM1040-582-LRT(config-percepxion)#
?
Command Set
active Sets active connection to Connection <number>
apply
Sets the mode on firmware updates
connection Sets the connection 1 or connection 2
content Sets the firmware and configuration check interval
device Sets the Device ID
, description, key, and name
do
To run exec commands in config mode
end Go back to EXEC mode
exit Exit from current mode
help
Description of the interactive help system
no Removes
device parameter(s)
show Displays the current configuration
state Percepxion state
status Sets the status update interval
Command Descriptions
Command
:
active
Description
:
Sets the Percepxion active connection to Connection <number>.
Syntax
:
active
connection connection <number>
Parameters
:
connection Sets active connection to Connection <number>
<1-2>
Sets active connection to Connection <1|2>
Mode
:
Configure Percepxion mode
Example
:
SISPM1040-582-LRT(config-percepxion)#
active connection connection 1
SISPM1040-582-LRT(config-percepxion)#
active connection connection 2
SISPM1040-582-LRT(config-percepxion)#
