Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
141
of
272
Command
:
dot1x
Description
:
Show IEEE Standard for port-based Network Access Control.
Syntax
:
show
dot1x statistics { eapol | radius | all } [ interface ( <port_type> [ <v_port_type_list> ] ) ]
show
dot1x status [ interface ( <port_type> [ <v_port_type_list> ] ) ] [ brief
Parameters
: statistics Shows statistics for either eapol or radius.
status
Shows dot1x status, such as admin state, port state and last source.
brief Show status in a brief format
all
Show all dot1x statistics
eapol
Show EAPoL statistics
radius
Show Backend Server statistics
| Output modifiers
interface Interface
* All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_list> Port list in 1/1-10
<cr>
Example
:
SISPM1040-582-LRT#
show dot1x status
GigabitEthernet 1/1 :
---------------------
Admin State Port State Last Source Last ID
------------------ --------------------- ----------------- -------------
Force Authorized Globally Disabled - -
Current Radius QOS Current Radius VLAN Current Guest VLAN
-------------------- -------------------- --------------------
- - -
GigabitEthernet 1/2 :
---------------------
Admin State Port State Last Source Last ID
------------------ --------------------- ----------------- -------------
Force Authorized Globally Disabled - -
Current Radius QOS Current Radius VLAN Current Guest VLAN
-------------------- -------------------- --------------------
- - -
- -
;;;;;;;
SISPM1040-582-LRT#
show dot1x statistics ?
all Show all dot1x statistics
eapol Show EAPoL statistics
radius Show Backend Server statistics
SISPM1040-582-LRT#
show dot1x statistics all
GigabitEthernet 1/1 EAPOL Statistics:
Rx Total: 0 Tx Total:
0
Rx Response/Id: 0 Tx Request/Id:
0
Rx Response: 0 Tx Request:
0
Rx Start: 0
Rx Logoff: 0
Rx Invalid Type: 0